Motorola RAZR V3m Cell Phone

MOTOROLA RAZR V3m CELLPHONE

<Verizon Wireless>

TO TURN ON THE PHONE:

1) Flip open the phone.

2) Press the red Power button briefly once.

3) Wait about 30 seconds for the screen to turn on and for the background picture to appear.

TO TURN OFF THE PHONE:

1) Flip open the phone.

2) Press and hold the red Power button for about 3 seconds.

3) Release the Power button.

_______________________________________________________________________

TO DIAL A NUMBER:

1) Flip open the phone.

2) Press the number keys to dial.

3) Press the green [Send] button on the left to send the phone number you dialed.

4) Wait for the connection to be made.

TO HANG UP:

1) Press the red Power button, or just close the phone.

TO AUTOMATICALLY REDIAL A NUMBER THAT WAS BUSY:

1) Press the green button once.

2) Press the green button again. The phone should redial the last number you dialed (and only the last number you dialed).

____________________________________________________________________

TO USE THE SPEAKERPHONE:

1) Press and hold the Speakerphone button (the shorter silver button on the left side of the upper part of the phone when the phone is opened) for about one second.

2) Release the silver button when the display says, “Spkrphone On…” and you hear the speaker turn ON.

3) Press the number keys to dial.

4) Press the green [Send] button on the left to send the phone number you dialed.

5) Wait for the connection to be made.

TO TURN OFF THE SPEAKERPHONE:

1) Press and hold the Speakerphone button (the shorter silver button on the left side of the top part of the phone) for about one second.

2) Release the silver button when the display says, “Spkrphone Off…” and the speaker turns OFF.

Note: Closing the phone will not turn the Speakerphone OFF. You must press the Speakerphone button (or turn the phone OFF with the red Power button).

TO INCREASE OR DECREASE THE VOLUME:

1) Press the upper part of the longer silver button on the left side of the top part of the phone to increase the volume.

2) Press the lower part of the same button to decrease the volume.

Note: When you are not in a call, these same buttons will change the volume of the ringer.

_______________________________________________________________________

TO DIAL A CONTACT IN THE CONTACTS LIST:

1) Press the “Soft” key at the upper right.

2) Press a number key X number of times until the correct letter appears on the display. You should then see the Contacts List jump down to the entries that begin with that letter.

3) Scroll down using the Down Arrow part of the silver Ring of Arrow keys, which is actually called the Navigation key, until the name you want is highlighted.

The Ring of Arrow keys (with the center OK button):

Note: The center OK button can also function as the Menu, View, Set, Save, and Open key (and a few other command, too), depending on the menu item you've chosen.

[4) Press the Right Arrow part of the silver Ring of Arrow keys until the correct phone number icon is displaying to the left of the name (such as the icon for Home Number, Work Number, Fax Number, Mobile Number 1, etc.), if that contact has more than one number.]

5) Press the green [Send] key to dial.

TO ADD A NEW CONTACT TO THE CONTACTS LIST:

METHOD 1:

1) Press the Soft key at the upper right to access the Contacts List.

2) Press the Soft key again to access the Options.

3) Press the OK key in the center of the Ring of Arrow keys.

4) To type the contact’s name, press a number key X number of times until the correct letter appears on the display. (For example, to type a “F,” press the 3 key three times.) Then wait about one second for the blinking cursor to move to the next space over, then type the next letter of the contact’s name.

5) Use the Down Arrow part of the Ring of Arrow keys to move down to the next field, then type the correct data in. The fields are:

Mobile 1

Home

Work

Email 1

Group (you can assign that person to a Group, such as your Bridge Club)

Picture (you can take a picture of the person, then add it here)

Ringtone (select a distinctive ringtone for that person, and only that person)

Mobile 2

Fax

Email 2

Tip: Use the CLR key if you want to delete a character or go back to a previous screen. (You can also just close the phone if you made a mistake and want to start over.)

6) Press the center OK key to save the changes you have made.

METHOD 2:

1) Press the number keys for the number as if you are dialing that contact.

2) Press the left “Soft” key (it’s now the Store key). You should see 1. Create New highlighted.

3) Press the OK key (it’s the center key in the Ring of Arrow keys).

4) Press the Down Arrow part of the Ring of Arrow keys to move the blinking cursor down to the Mobile 1, Mobile 2, Home, Work, etc. box, depending on what type of number this is.

5) Press the center OK key.

6) Type in the name of the contact using the number keys (pressed multiple times).

7) Press the center key (which is now the Save key).

TO ERASE A CONTACT:

1) Press the Soft key in the upper right to access the Contacts List.

2) Press a number key X number of times until the correct letter appears on the display. You should then see the Contacts List jump down to the names that begin with that letter.

3) Scroll down to the contact you want using the Down Arrow key.

4) Press the Soft key again to access the Options.

5) Press the Down Arrow key once to highlight 2. Erase.

6) Press the OK key.

7) Press the OK key if Yes is highlighted.

_______________________________________________________________________

TO ASSIGN A CONTACT TO A “ONE-TOUCH” NUMBER (1 through 9 on the keypad) OR THE “SPEED DIAL NUMBERS (10 through 999):

1) Press the center key in the Ring of Arrow keys (it’s now the Menu button).

[2) Press the Left Arrow or Right Arrow key until CONTACTS appears at the top of the menu on the screen.]

3) Press the Down Arrow three times until 4. Speed Dials is highlighted.

4) Press the center key in the Ring of Arrow keys (it’s now the OK key).

5) Scroll down to the first “Unassigned” you see, then press the center key, which is now the Set key (or the Move key if you are highlighting an existing contact and not an “Unassigned” number).

6) You should see Choose Name at the top of the menu. Scroll down or press a number key X number of times until the correct letter appears on the display. You should then see the Contacts List jump down to the entries that begin with that letter.

7) Press the Down Arrow key X number of times to highlight the name you want, then press the center key (OK).

8) Choose the type of number this is (such as Mobile 1, Home, Work, etc.) with the Down Arrow key.

9) Press the center key (OK).

10) Press the center key (OK) again.

TO USE A ONE-TOUCH NUMBER (THESE ARE KEYS # 1 THROUGH # 9):

1) Press and hold the number key (for example, 2) for one second to dial the phone number associated with that key.

Tip: You may want to memorize or write down the list of numbers assigned to the 1 through 9 keys. (Number 1 is usually set to your Voicemail number, but you can assign 2 through 9 to whatever numbers you want.)

TO USE A SPEED DIAL NUMBER (“10” THROUGH “999):

1) Press the number keys for that speed dial number (for example, 22).

2) Press the # key.

3) Press the Down Arrow key X number of times to highlight Work, Mobile 1, Home, or whatever number you want to dial, if that contact has more than one number.

4) Press the green [Send] button to dial the number.

________________________________________________________________________

TO CHARGE THE PHONE:

1) Insert the mini-USB connector on the AC Charger cable into the USB port on the lower left-side of the phone.

2) Plug the AC Charger into an AC wall outlet or a surge protector. The battery indicator on the display will flash as the battery is charged.

3) You should see “Charge Complete” on the display and the battery indicator LEDs turn solid when the battery is fully charged.

4) Unplug the mini-USB connector from the phone.

Note: The phone’s battery normally takes about 1/2 to 4 hours to charge depending on how much you’ve been using the phone. It will not damage the battery to leave the charger plugged into the phone longer than this.

The lithium-ion battery normally lasts for about two to three years, then it should be discarded and a new one should be purchased. Actually, it's better to take any used batteries and old cellphones when you get a replacement phone to a recycling center instead of throwing it into the trash. (In fact, this is the law in some states.)